| STAINED DECORATIVE GLASS Le-Gardien’s
diversified networks allow it to supply stained decorative glass from various sources
around the world, which provides permanently decorated, toughened glass without the
expenses and time taken by traditional stained glass or screen-printing methods.
Our range of stained decorative glass may be applied to
both standard and specialised glasses by simultaneously fusing ceramic-based decals into
the glass surface during the toughening process.
Characteristics
- Water-resistant, scratch-resistant & easy maintenance
- Easy installation which is similar to normal glass
- Cost effective because of its light-weight, unlike marble.
- No colour fading & corrosion compared to marble/ granite
- Safety glass as toughened process is mandatory.
- Energy-saving on air-conditioning of use with reflective coating
- Versalite in use on flat sheet, curved areas and columns/ pillars.
- Use as spandrel glass due to its permanent durability & strength
- Decoration unaffected by UV, thermal stress or climate conditions
Availability
- Range of thickness from 3mm to 19mm.
- Maximum size of 2438mm x 7500m without any glass joint for 12mm, 15mm
& 19mm clear glass (subject to availability of raw glass)
Applications
Curtain Walling |
Decorative Balustrade
|
Wall Cladding |
Signage & Fasciae
|
Columns & Pillars
|
Furniture Applications
|
Ceilings |
Fire surrounds |
Partitioning |
Shower cubicle |
Cutting Boards |
Work surfaces |
Cooker Fronts |
Lift & staircase
claddings |
Vanity Top |
Illuminated Panels |
Toilets |
Entrance Doors |
Mouse Pads |
Glazing |
Suitability
Residential &
Commercial Buildings |
Discos / Dance Halls/ Bars
|
Factories & Warehouses
|
Leisure Centres |
Shopping Centres |
Banks |
Restaurants |
Museums |
Shops |
Hotels |
Station / Bus Terminals |
|
Benefits of Using STained Decorative Glass
| Advantage of Using Stained Decorative Glass |
Disadvantage of Using other equivalent products |
Unique |
Dull & Conventional |
Prestigious/ High Profile Image |
Not eye catching |
Permanent |
Paint will deteriorate, due to porosity
and stone will stain & discolour |
Colour fast |
Paint & plastics will fade |
Colour consistent |
Colour batching problems during replacements |
Non-Porous (easy to clean) |
Porous (difficult to clean) |
Scratch resistant |
Easily scratched |
Does not crack |
Paint & Stone will crack |
Easily fixed (by aluminium extrusion or
glue) |
Painting of stone is time consuming and
even worst for replacement |
Lightweight |
Marble cladding is heavy & cumbersome |
Readily available |
Marble & stone are not readily
available |
Inexpensive |
Stone cladding is costly |
Value for money |
Cheap materials (paint) are outweighed by
cost of maintenance |
Can be illuminated |
Paint & stone cannot be illuminated |
|
 
|